Message: 10
Date: Mon, 15 Oct 2018 09:21:36 -0700 (MST)
From: n6hz<
[hidden email]>
To:
[hidden email]
Subject: Re: [Elecraft] Elecraft P3 Bar Cursor
Message-ID:<
[hidden email]>
Content-Type: text/plain; charset=UTF-8
Hi Ed,
Are there magenta and green arrows toward the bottom of the spectrum display?
>>>yes
These indicate where the cursors are relative to your current center frequency.
>>>Understood
If you are in fixed tune mode, you can easily re-center your VFO A cursor by two consecutive long presses of the SPAN/CENTER button.
>>>In Fixed Tune Mode, two consecutive long presses of the SPAN/CENTER button didn't help. Green and Magenta arrows are still at the bottom left of the display
If all else fails, a memory reset can be performed by holding down the MENU
button while powering up the P3. Note that this will erase an function key
settings.
>>>I did a memory reset. The green and magenta arrows are still at the bottom left of the display.
>>>I reloaded all firmware with the latest versions. The Green and Magenta arrows are still at the bottom left of the display.
>>>The P3 seems to be working with the exception of the U and BAR cursors.
Ed
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
