[P3] Dead P3!
Locked
 
|
Sorry about the missing subject line.
On Tue, 24 Jun 2014, Hisashi T Fujinaka wrote: > Well that was pleasant. I was making a band change (chasing W1AW/3 and > W1AW/9) and my P3 with P3SVGA went into a screen that said something > like "Ready to load Firmware." I tried to load the firmware but at the > power-cycle I got the screen: > > ===== > > **** FATAL ERROR **** > In: ddc_set_coef() > span=0 > > Press any active key to escape > > ===== > > I tried again, and the same screen appeared. > > None of the keys did a thing. So I power cycled again and saw the same > screen. I thought removing the P3SVGA might help but reloading and > resetting gave the same error. > > What next? > > Thanks. > > -- Hisashi T Fujinaka - [hidden email] BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
Hi Todd. Look up "Parameter Initialization" in the manual. That oughta
clear it. 73, Carl WS7L On Tue, Jun 24, 2014 at 8:35 PM, Hisashi T Fujinaka <[hidden email]> wrote: > Sorry about the missing subject line. > > On Tue, 24 Jun 2014, Hisashi T Fujinaka wrote: > > Well that was pleasant. I was making a band change (chasing W1AW/3 and >> W1AW/9) and my P3 with P3SVGA went into a screen that said something >> like "Ready to load Firmware." I tried to load the firmware but at the >> power-cycle I got the screen: >> >> ===== >> >> **** FATAL ERROR **** >> In: ddc_set_coef() >> span=0 >> >> Press any active key to escape >> >> ===== >> >> I tried again, and the same screen appeared. >> >> None of the keys did a thing. So I power cycled again and saw the same >> screen. I thought removing the P3SVGA might help but reloading and >> resetting gave the same error. >> >> What next? >> >> Thanks. >> >> >> > -- > Hisashi T Fujinaka - [hidden email] > BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
Odd. Sam Morgan told me to hold MENU and POWER and I don't see that in
the manual, but it worked. On Tue, 24 Jun 2014, Carl Clawson wrote: > Hi Todd. Look up "Parameter Initialization" in the manual. That oughta > clear it. > > 73, Carl WS7L > > > On Tue, Jun 24, 2014 at 8:35 PM, Hisashi T Fujinaka <[hidden email]> > wrote: > >> Sorry about the missing subject line. >> >> On Tue, 24 Jun 2014, Hisashi T Fujinaka wrote: >> >> Well that was pleasant. I was making a band change (chasing W1AW/3 and >>> W1AW/9) and my P3 with P3SVGA went into a screen that said something >>> like "Ready to load Firmware." I tried to load the firmware but at the >>> power-cycle I got the screen: >>> >>> ===== >>> >>> **** FATAL ERROR **** >>> In: ddc_set_coef() >>> span=0 >>> >>> Press any active key to escape >>> >>> ===== >>> >>> I tried again, and the same screen appeared. >>> >>> None of the keys did a thing. So I power cycled again and saw the same >>> screen. I thought removing the P3SVGA might help but reloading and >>> resetting gave the same error. >>> >>> What next? >>> >>> Thanks. >>> >>> >>> >> -- >> Hisashi T Fujinaka - [hidden email] >> BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [hidden email] >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > -- Hisashi T Fujinaka - [hidden email] BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |