Over the course of the last several weeks my P3 Display has developed an annoying white "flashing or blinking" in the lower half of the display. To be more accurate, it is in the lower portion of the receive signal display. That is if I have "labels" enabled, it does not flash/blink in that portion of the display. It also only flashes/blinks on the P3 screen, not the monitor that also displays the receive signal via the P3VGA module. It slows considerable after about 30 minutes or so but never completely stops which suggests a thermal issue. Also note I have the P3TXMON accessory in place. I have checked all the connections and reset the firmware.Any feedback would be appreciated.Bill - W0BBI
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
