P3 Freezing while in RX

[WI4T]

My P3 is freezing while in RX mode, no transmit.  I have a K3 -P3-KAT500 and
KPA500

My firmware for P3 is MCU 01.26

 

I have beads on all cables going to the P3 and I am using a separate power
supply

 

Any thoughts?

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[WI4T]

Good news, reloading the firmware seemed to do the trick.  Thanks for the suggestion.

Greg
WI4T

[WI4T]

Bad  news, the P3 is still freezing up.  I can leave it in rx and it will freeze in about 2 minutes.  I have disconnected everything except the power and it still will freeze after a while.

I don't know what else to do at this point.

[M0XDF]

Check all the boards are 'home' in sockets etc?
73 de David, M0XDF (K3 #174, P3 #108)
--
Being a System Administrator is like being a plumber.
If you do a good job, nobody knows. If you screw up, everybody gets covered in s**t!

On 2 Nov 2013, at 11:58, WI4T wrote:

> Bad  news, the P3 is still freezing up.  I can leave it in rx and it will
> freeze in about 2 minutes.  I have disconnected everything except the power
> and it still will freeze after a while.
>
> I don't know what else to do at this point.
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/P3-Freezing-while-in-RX-tp7579330p7580365.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Nr4c]

What does Elecraft service say about it?  Either an email or phone call should get some answers.

You've probably checked cables, connectors, baud-rate etc.

...bill nr4c

Sent from my Verizon Wireless 4G LTE DROID

WI4T <[hidden email]> wrote:

>Bad  news, the P3 is still freezing up.  I can leave it in rx and it will
>freeze in about 2 minutes.  I have disconnected everything except the power
>and it still will freeze after a while.
>
>I don't know what else to do at this point.
>
>
>
>--
>View this message in context: http://elecraft.365791.n2.nabble.com/P3-Freezing-while-in-RX-tp7579330p7580365.html
>Sent from the Elecraft mailing list archive at Nabble.com.
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html