P3 Macro question

[Mike K2MK]

I can actuate a P3 macro from within the P3 Utility. But I don't see a way to attach the macro to one of the function keys. Is that coming?

I added a P3 command to the tail end of an existing K3 macro using the K3 Utility. It worked properly from within the K3 Utility. I then wrote that macro to a K3 button but only the K3 portion of the macro worked. The P3 command never found its way to the P3. I tried putting the P3 command at the front end and the tail end of the macro.

Any ideas?

73,
Mike K2MK

[Vic K2VCO]

I asked the same question. I also wanted to to send K3 macros from P3 buttons! I believe
that these features are 'on the list' for future development.

On 4/24/2011 2:05 AM, Mike K2MK wrote:

> I can actuate a P3 macro from within the P3 Utility. But I don't see a way to
> attach the macro to one of the function keys. Is that coming?
>
> I added a P3 command to the tail end of an existing K3 macro using the K3
> Utility. It worked properly from within the K3 Utility. I then wrote that
> macro to a K3 button but only the K3 portion of the macro worked. The P3
> command never found its way to the P3. I tried putting the P3 command at the
> front end and the tail end of the macro.
>
> Any ideas?
>
> 73,
> Mike K2MK

--
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Alan Bloom]

Yes, on the list.

Alan N1AL


On Sun, 2011-04-24 at 08:31 -0700, Vic K2VCO wrote:

> I asked the same question. I also wanted to to send K3 macros from P3 buttons! I believe
> that these features are 'on the list' for future development.
>
> On 4/24/2011 2:05 AM, Mike K2MK wrote:
> > I can actuate a P3 macro from within the P3 Utility. But I don't see a way to
> > attach the macro to one of the function keys. Is that coming?
> >
> > I added a P3 command to the tail end of an existing K3 macro using the K3
> > Utility. It worked properly from within the K3 Utility. I then wrote that
> > macro to a K3 button but only the K3 portion of the macro worked. The P3
> > command never found its way to the P3. I tried putting the P3 command at the
> > front end and the tail end of the macro.
> >
> > Any ideas?
> >
> > 73,
> > Mike K2MK
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Mike K2MK]

Hi Alan,

My original posting had two parts. I suspect you answered the question posed in the first paragraph. Do you have any comment on my findings in the second paragraph.

Here is the scenario. I have K3 macros set up for different CW splits. They turn on the Sub RX, copy parameters, turn on split a certain amount, etc.. To that, I wanted to add setting the P3 span an amount consistent with the split. So if I have K3 macros for splits of 1, 2, and 5KHz then I might want to set the P3 spans to 2, 4, and 10KHz respectively.

73,
Mike K2MK

Alan Bloom wrote

Yes, on the list.

Alan N1AL
>
>
>
> On 4/24/2011 2:05 AM, Mike K2MK wrote:
> > I can actuate a P3 macro from within the P3 Utility. But I don't see a way to
> > attach the macro to one of the function keys. Is that coming?
> >
> > I added a P3 command to the tail end of an existing K3 macro using the K3
> > Utility. It worked properly from within the K3 Utility. I then wrote that
> > macro to a K3 button but only the K3 portion of the macro worked. The P3
> > command never found its way to the P3. I tried putting the P3 command at the
> > front end and the tail end of the macro.
> >
> > Any ideas?
> >
> > 73,
> > Mike K2MK