This morning I picked up P3 Kit No.77 (ordered April 15) from the
Parcelforce Leeds Depot. I assembled it this afternoon and it works well :-)
Luckily I have all my nuts ;-) but the following minor points arose, mainly
about the latest manual and errata:-
1. As far as I can tell, having searched the (good) packaging several times,
my kit did not include the Hole Cover - Part No E100396 referred to in
Errata A3-1. I have emailed parts.
2. Errata A-3 asks for the part number of the ribbon cable to be changed on
page 25 of the manual, but it's already the same as the part number in the
Errata.
3. Item 5 in Errata A3-1 asks for a change to be made on page 38 of the
manual but the change is actually required on page 37, not 38. (The change
refers to page 38)
4. Page 36. The paragraph at the top of the page asks for one end of the TMP
cable to be plugged into J102 on the RF Board. On my RF Board the TMP socket
is labelled J902.
73 to all
Geoff
G3UCK
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
