Many thanks to Bill, W4ZV, for providing the LVL CAL instructions
in his Nov. 11 reflector message. I did the calibration using an XG-2
both before and after doing the IF output mod in my older K3.
Before the mod, my transfer gain was -21 dB, which I think should
have been -18 dB because I have a 3 dB Rx antenna splitter in line
with my XG-2.
After the IF output mod, my transfer gain is -8.3 dB. (This time I took
into account the 3 dB attenuation in my splitter by adjusting the level
of the peak to -76 dBm instead of -73 dBm.)
73,
Chuck NI0C
K3 s/n 1061 P3 s/n 844
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
