P3 Output

[Tim Seed]

I see on my P3 that there is an additional BNC output, which is “un-buffered”….

Is there any way I can use this  ?
What actually is in this output I/Q only - or RF

More curious than anything …

Regards

   Tim
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Nr4c]

It’s a continuation of the IF from the radio. You can connect an SDR receiver there for instance.

Sent from my iPhone
...nr4c. bill

> On May 19, 2020, at 5:19 AM, "[hidden email]" <[hidden email]> wrote:
>
> I see on my P3 that there is an additional BNC output, which is “un-buffered”….
>
> Is there any way I can use this  ?
> What actually is in this output I/Q only - or RF
>
> More curious than anything …
>
> Regards
>
>   Tim
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]