I like the operation of the “Full Span” selection, but it seems after a band change the center frequency of a 20 kHz span has changed. Instead of having 14080 – 14100, I’d see 14075 – 14095.
Jim N7US
From: w4sc <
[hidden email]>
Sent: Sunday, September 27, 2020 20:24
To: Jim McDonald <
[hidden email]>;
[hidden email]
Subject: [Elecraft] [P3] P3 CENTER frequency
From Alan N1AL:
The P3 does remember center frequency per band. However, if you tune the
K3 VFO A to a frequency outside the old P3 display range, then the P3
center frequency is changed according to the rules specified by the
"FixMode" menu setting. If you want the center frequency never to change
no matter what frequency the K3 is set to, then set MENU:FixMode to
"Static".
Alan N1AL
Sent from Mail<
https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
