how about making up a little relay box, power the relay (coil) from the K3 aux out and the other units from your PSU via the relay - then when you turn off the K3, the other units go off too. Don't forget a protection diode across the relay.
73 de M0XDF (K3 #174, P3 #108, KX3 #???)
--
It takes a great deal of bravery to stand up to our enemies, but just as much to stand up to our friends. -J.K. Rowling, author (b. 1965)
On 19 Dec 2011, at 13:55, Giuseppe Sorrentino wrote:
> Hy to all, perhaps there's someone has already done this. I must wire the microham usbIII interface to my K3/P3. Now i have the P3 that take the 13.8v from the back of my K3 but also the interface has a cable to connect to that jack on the back of K3. Is it a particular reason to leave the P3 cable on the 13.8 conn on the back of K3 and wire the microham to a power supply or nothing particular???
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
