P3 Panadapter

[K5DNL]

Hello All,

 
If I am looking at the bandwidth of a signal on the P3
Can I set marker A on the left side of the signal and
Marker B on the right side and have a digital readout
Showing the bandwidth of the signal?
 
Ken K5DNL



     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[N5GE]

You could also center the filter width bracket on the signal and adjust the
filter bandwidth so it fits against the right and left sides of the signal and
read the bandwidth from the filter width setting on the K3.

73,

Tom Childers
Radio Amateur N5GE
Licensed since 1976
QCWA Life Member 35102
ARRL Life Member
Retired Professional
C# Software developer
http://www.n5ge.net

On Sun, 9 Jan 2011 11:45:02 -0800 (PST), Ken Roberson <[hidden email]>
wrote:

>Hello All,
>
>
>If I am looking at the bandwidth of a signal on the P3
>Can I set marker A on the left side of the signal and
>Marker B on the right side and have a digital readout
>Showing the bandwidth of the signal?
>
>Ken K5DNL
[snip]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html