P3 Query

[David Bunte]

I have recently set up a K3,P3 & KPA500 for a older ham friend.  Today when
I was visiting him, he pointed out that the "cursor" on his P3 is no longer
a "colored vertical bar", which changes width with the width control on the
K3, but it is now just a colored bar at the base line of the trace, with
small vertical edges to show the width of the passband.

He would like the full vertical bar back again, and cannot recall what he
pushed that changed it from the way it was when I was last at his QTH.

I know I am not too bright, so it is probably right under my nose, but I
can't find how to change that back to the vertical bar.

Any help is appreciated.

73 de Dave - K9FN
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Joe Subich, W4TV-4]

Menu - Cursors.  Tapping select will toggle between the vertical bar
and "U" cursors.  IITM!

73,

    ... Joe, W4TV


On 10/7/2013 7:59 PM, David Bunte wrote:

> I have recently set up a K3,P3 & KPA500 for a older ham friend.  Today when
> I was visiting him, he pointed out that the "cursor" on his P3 is no longer
> a "colored vertical bar", which changes width with the width control on the
> K3, but it is now just a colored bar at the base line of the trace, with
> small vertical edges to show the width of the passband.
>
> He would like the full vertical bar back again, and cannot recall what he
> pushed that changed it from the way it was when I was last at his QTH.
>
> I know I am not too bright, so it is probably right under my nose, but I
> can't find how to change that back to the vertical bar.
>
> Any help is appreciated.
>
> 73 de Dave - K9FN
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Paul Saffren N6HZ]

David,

Simply press the MENU button on the front of the P3, then using the SELECT knob, scroll through the menu until you get to "VFO CURSOR TYPE" .  Then press the SELECT knob in to toggle between U and BAR .

73,

Paul