P3 Question

[Tom McCulloch]

I apologize if this has been asked before (and it most likely has been)
-- Can the P3 be used with the K2 (barefoot)?

tnx de
Tom
WB2QGD
K2 #1103
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Alan Bloom]

Yes, although the RS-232 commands are not implemented at this time.  So
you can see the spectrum/waterfall just fine and most P3 functions work
but it does not read out the K2 frequency, and functions like
clidk-to-QSY are not implemented.

And of course you have to add an IF output connector to the K2.
Something like this:
http://www.cliftonlaboratories.com/k2_interface.htm

Alan N1AL


On Sat, 2011-04-23 at 11:58 -0400, Tom McCulloch wrote:

> I apologize if this has been asked before (and it most likely has been)
> -- Can the P3 be used with the K2 (barefoot)?
>
> tnx de
> Tom
> WB2QGD
> K2 #1103
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html