Keep in mind that a lot of functions of the P3 will only work with the K3 -- like QSYing
with the knob on the P3.
Also -- you will only be able to use the P3 in tracking mode, not fixed-tune mode, unless
the radio is a K3.
And... will it be able to display actual signal frequencies or will it display the IF
frequency? I think it will show the IF frequency.
I think that all of these features depend on RS232 communication functions that are not
implemented in the K2.
On 9/8/2012 7:53 PM, Don Wilhelm wrote:
> Tjhe current P3 goes down to an IF of 455 kHz, no need for ny P3
> upgrades or modifications as long as the traneiver has an IF output.
>
> 73,
> Don W3FPR
>
> On 9/8/2012 10:31 PM, Kevin Stover wrote:
>> If I'm not mistaken the P3 either does or soon will support the K2's 4.915Mhz IF.
>>
>> The "problem" is getting that signal out of the radio.
>>
>> K8ZOA at Clifton Labratories makes a buffer amp for doing just that. It's the Z10000B. I have installed one in my K2/100 and use an LP-Pan and computer to get a pan adapter display.
>>
>> If the P3 supports the K2 Intermediate Frequency it should work...without LP-Pan and computer.
>>
>>
>> On Sat, 08 Sep 2012 19:26:00 -0400
>> Tom McCulloch <
[hidden email]> wrote:
>>
>>> Can the P3 be used with the K2? If not is there something comparable
>>> out there?
>>
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
--
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
