On 11/11 Eric answered my question in my original post. However it
does not appear to me that turning off averaging will make the display
look or act like the ProII display. At the moment it appears that an
average value of 5 is about right IF you use the finest tuning,
(3.526.955) for a CW signal. Since the P3 needs to recalculate the
display average when the frequency is changed using coarse tuning and
moving the VFO knob quickly to QSY makes the display jump very much. I
know they will get this sorted out.
One thing I did learn that I was doing wrong was to not "hold" the
average button after making an adjustment but just "tap" it. Holding it
will turn off averaging. (When all else fails read the instruction book!)
Gene, W2BXR
K3, 1188
P3, 712
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
