P3 SVGA Display Waterfall Contrast (Mark / WU6R)

[Elecraft mailing list]

I've recently noticed that I have almost no waterfall displaying on my 24" monitor which makes using the SVGA feature almost useless.  I thought maybe it was because of poor band conditions, but now I'm wondering if there is something that needs to be adjusted...  I used to have a near exact replica of the P3 display showing on my 24" monitor.  I did swap out and connect another monitor and I'm still missing the waterfall contrast.  The P3 SVGA resolution is set to 1920 x 1080, which is where I've always had it set.  I haven't adjusted any other settings lately.


Is there a way to adjust the SVGA contrast that the P3 SVGA board is outputting?  Any suggestions are greatly appreciated.


73,
Mark / WU6R


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Jim Brown-10]

On 6/23/2019 5:53 AM, Mark Wheeler via Elecraft wrote:
> I've recently noticed that I have almost no waterfall displaying on my
> 24" monitor which makes using the SVGA feature almost useless.  I
> thought maybe it was because of poor band conditions, but now I'm
> wondering if there is something that needs to be adjusted...

Have you studied the manual?  There are menu settings for this.

73, Jim K9YC

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]