Since you "buggered a couple screws", I suggest you buy yourself a new
#1 phillip0s screwdriver.
Get a good one and throw those worn ones away.
I replace the one I use at the workbench every 5 to 6 months. It is
used every day, but I do not want to strip the heads on the screws in my
customer's radios either.
If you want to test your screwdriver, put a phillips screw on the tip
and turn it so the screwdriver shaft is horizontal - if the screw falls
off, the tip is worn and should be replaced.
73,
Don W3FPR
On 3/26/2012 9:08 PM, David F. Reed wrote:
> Just wanted to chime in with the rest of you; I received my P3SVGA today.
> installation was a snap (other than my buggering up a couple of the
> screws on the top cover - replacements are on the way).
> It works great! Thank you elecraft for making a great product even better!
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
