Current P3 firmware can display decoded RTTY. It's similar in capability to
the K3 Utility Terminal page, where the K3 does the RTTY decode and the P3
SVGA board displays the decoded character stream.
This was released about 9 months ago. See the P3 SVGA Option Installation
and Operating Instructions, revision D (9/30/2012) on our manuals page. See
"data terminal setup" on page 7.
http://www.elecraft.com/manual/E740170%20P3SVGA%20Manual%20Rev%20D.pdf73 de Dick, K6KR
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]] On Behalf Of Joe K2UF
Sent: Tuesday, June 25, 2013 20:20 PM
To:
[hidden email]
Subject: [Elecraft] P3/SVGA
Anyone know the ETA of the upgrade for SVGA decoding of RTTY?
73 Joe K2UF
With enough THRUST pig fly just fine.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
