P3 TX Audio monitoring

[Richard Fjeld]

*Well as nobody responded to my original post which identified a possible
issue with my station setup which allowed the P3 to display live TX audio
from the K3 I thought I would mention the subsequent test I tried.

Gary,

I'll respond.  What you are seeing is normal.  It happens on my P3 at times.  I would like to have it be user selectable, or better yet, full time.  

We can disconnect the serial cable (if memory serves me) to monitor our Tx at present. But as I see it happening at times, I realize that it could be provided to us.  

I like seeing my signal displayed so that I know I have a clean signal with straight skirts, and if the audio needs equalizing, etc.

Richard Fjeld, NØCE


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Bruce Beford-2]

Thanks for that update, Al. Most appreciated.
Bruce, N1RX
 
 
> The plan is to include a modulation monitor function with the future
> external power sensor option.  I've had the hardware done for months
> but have been too busy with the SVGA development to have time to do
> the firmware.  Real Soon Now.  :=)
>
> Alan N1AL

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html