P3 TX Mon

[Chris Lewis]

Hi,

 

Can anyone please tell me how the TX monitor facility on the P3 picks up RF?
As there are two options, 100w and 2KW, is it an inline sampling device on
the antenna cable, please?   If you have the 2KW version, does it work
adequately when running barefoot at 100w?

 

Thanks

 

73

Chris G3NHL

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Chris,

The TXMON uses a in-line sampling coupler.  The choices are 200 watt and
2000 watt.

The 2000 watt coupler displays power in 1 watt increments while the 200
watt displays the power in 0.1 watt units.  Whether that is adequate for
your needs or not is only for you to say.

73,
Don W3FPR

On 7/9/2016 5:59 AM, Chris Lewis wrote:
> Can anyone please tell me how the TX monitor facility on the P3 picks up RF?
> As there are two options, 100w and 2KW, is it an inline sampling device on
> the antenna cable, please?   If you have the 2KW version, does it work
> adequately when running barefoot at 100w?
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]