P3 Text Display

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

P3 Text Display

Rich-4
A week or so ago there was email that was referring to the P3 displaying
data (CW/RTTY).  I did not think this feature was available.

 

Am I correct?

 

Rich

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: P3 Text Display

ac0h
On Thu, 17 Feb 2011 23:07:33 -0500
"K3RWN" <[hidden email]> wrote:

> A week or so ago there was email that was referring to the P3
> displaying data (CW/RTTY).  I did not think this feature was
> available.
>
>  
>
> Am I correct?
>
>  
>
> Rich

It's not.



--
R. Kevin Stover
AC0H
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

P3 with transverters

Dale Parfitt-3

It has been since Fall that I have had  my K3 up on 1296MHz as we have been
doing major landscaping around the dish (huge rock walls) and the dish had
to be disconnected.
I finally got everything up and running for this evening's moon pass. The
problem is the P3 shows no baseline signal and the waterfall is a blank pink
screen. I can hear signals off the moon, and the P3 knows it is on 1296MHz
as it is indicated on the top of the P3 display- but no spectral or
waterfall regardless of the ref level. Same thing on the internal 2M
transverter. Everything was working FB last Fall- of course there has been a
pair of firmware upgrades since then. The P3 appears to function properly
for perhaps 2 seconds then goes to no signals. CONFIG settings all appear
correct to me.
Any ideas?

Tnx,

Dale W4OP

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html