P3 Updated Firmware

[Phil Hystad-3]

So, I updated my K3 and P3 firmware last night to the latest versions.  These are:

K3  MCU  4.25
      FPF    1.14
      DSP1  2.71
      DVR   1.03

P3   1.00


Now, after the firmware updates, first the K3 and then the P3, everything seemed to be working fine.  But, the P3 is operating differently.  When I adjust the K3 VFO, the cursor on the P3 shifts up or down depending on my VFO direction but prior to the update, the spectrum itself used to move.

There are some other little differences too.

Now, I have not kept up on all of the dialog regarding the P3 lately so I am assuming these are new features or changes to the way the P3 worked.  But, I can't find any list of what the changes are.  Does such a list exist.  The current changes listed on the web site don't really say anything useful.  Can someone point out major areas in the documentation that might have changed?

73, phil, K7PEH

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[KK7P]

Download the latest Errata for the P3 manual from the Elecraft website.  
It documents the fixed-tune mode and other things you are observing.

73,

Lyle KK7P

> ... Can someone point out major areas in the documentation that might have changed?

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html