[P3] VFO B tracking mode feature?

[Carl Clawson-3]

This is something that does not appear to exist. I would prefer an option
to have the P3 track VFO B on the K3 instead of VFO A. There is a good use
for this in SO2V (single operator, two VFO) operating, where your VFO A
neighborhood is (usually) boring but VFO B can be interesting.

73 and thanks for listening,
Carl WS7L
K3 #486
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[alsopb]

Carl,

You are right.

You can do it yourself though if you have a subrx.
http://groups.yahoo.com/group/Elecraft_K3/files/KRX3_IF_Out/

Works just fine.

At one time, I fooled around with duplicating the K3 JFET output
circuitry present in the main RX.  The use of the Clifton Labs
buffer/isolation preamp is a better solution.

73 de Brian/K3KO

On 12/3/2012 21:00, Carl Clawson wrote:
> This is something that does not appear to exist. I would prefer an option
> to have the P3 track VFO B on the K3 instead of VFO A. There is a good use
> for this in SO2V (single operator, two VFO) operating, where your VFO A
> neighborhood is (usually) boring but VFO B can be interesting.
>
> 73 and thanks for listening,
> Carl WS7L
> K3 #486
>


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2221 / Virus Database: 2634/5434 - Release Date: 12/03/12

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html