P3 - clicking and display jump

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

P3 - clicking and display jump

VE3NFK
Hi

New P3 sn 2xx   while listening 20 meters, hear 'clicking' from P3 and display jumps up/down
from about -120 to -117 and back.   intermittent - but more prevalent when there is a sig
preamp on or off freq 14005 -14031 sigs S5 -9

any ideas?

tnxs 73

John VE3NFK
Reply | Threaded
Open this post in threaded view
|

Re: P3 - clicking and display jump

Alan Bloom
John,

The P3 automatically turns off its internal preamp (using a relay)
whenever a strong signal overloads the front end.  You might try turning
off the preamp in the K3 or even turning on the attenuator.  That's a
good idea anyway when the band is wide open, to keep the K3 nice and
linear.

Alan


On Fri, 2010-09-17 at 16:33 -0700, VE3NFK wrote:

> Hi
>
> New P3 sn 2xx   while listening 20 meters, hear 'clicking' from P3 and
> display jumps up/down
> from about -120 to -117 and back.   intermittent - but more prevalent when
> there is a sig
> preamp on or off freq 14005 -14031 sigs S5 -9
>
> any ideas?
>
> tnxs 73
>
> John VE3NFK


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html