John,
The P3 automatically turns off its internal preamp (using a relay)
whenever a strong signal overloads the front end. You might try turning
off the preamp in the K3 or even turning on the attenuator. That's a
good idea anyway when the band is wide open, to keep the K3 nice and
linear.
Alan
On Fri, 2010-09-17 at 16:33 -0700, VE3NFK wrote:
> Hi
>
> New P3 sn 2xx while listening 20 meters, hear 'clicking' from P3 and
> display jumps up/down
> from about -120 to -117 and back. intermittent - but more prevalent when
> there is a sig
> preamp on or off freq 14005 -14031 sigs S5 -9
>
> any ideas?
>
> tnxs 73
>
> John VE3NFK
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html