You can disable the SVGA display with a menu selection, but it makes
only a very small difference in the current consumption. On mine, the
total P3 current goes from about 590 mA to about 580 mA. (That's with a
13.8V supply. The current is higher with a lower supply voltage.)
A modification kit is planned for the K3 that will increase the current
available from the 12VDC OUT jack.
Alan N1AL
On Fri, 2012-03-16 at 16:30 -0500, Oscar Staudt wrote:
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html