Hi guys. I've just hung together my new P3 and have noticed a couple of
things that I can't recall as having been raised before.
On test, I noticed that the display wasn't quite square with the front panel
aperture. It runs out only a millimetre or so, but it was the first thing
that registered with me after its maiden power on. Do others see this? Am
I being too fussy? I've had it to bits and tried every which way to square
it up, but the flubber bed it sits in, and the flubber that covers the
keypads is all one piece and it seems to have been glued to the PCB just a
wee bit on the skew.
Second, does everyone's display sit very close to the left hand side of the
front panel aperture, while there's a broader, unused strip to the right
side of the aperture?
73 Dave, G3TJP
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
