P3 meters MCU 01.60

[Tom, DL2RUM]

From the firmware note:
* SWR meter blanked:  Both the analog and digital SWR displays are now blanked whenever the transmit power is too low to give a valid reading.

What I have to do to get the meters blanked during reception?

73 de Tom DL2RUM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Alan Bloom]

By "blanked" it means that the numeric SWR value and the SWR meter
"needle" are erased.  The meter outline and scale are still there.

Both the SWR and power meters are blanked in this way when the
transceiver goes back to receive mode.

Alan N1AL


On 04/06/2016 03:14 AM, Thomas Lindner wrote:

>> From the firmware note:
> * SWR meter blanked:  Both the analog and digital SWR displays are
> now blanked whenever the transmit power is too low to give a valid
> reading.
>
> What I have to do to get the meters blanked during reception?
>
> 73 de Tom DL2RUM
> ______________________________________________________________
> Elecraft mailing list Home:
> http://mailman.qth.net/mailman/listinfo/elecraft Help:
> http://mailman.qth.net/mmfaq.htm Post:
> mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net Please help support this
> email list: http://www.qsl.net/donate.html Message delivered to
> [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]