P3: new unit no workee - addendum

[Ralph Parker]

I forgot to say that the RS-232 rate for K3, P3 and logging program are all
set to 4800 baud.

Ralph, VE7XF
 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Ralph,

Set all to 38,400.  Then use P3 Utility to download the latest P3
firmware.  There was a recent update to fix the "multiple baud rates"
problem.

73,
Don W3FPR

On 5/3/2012 4:43 PM, Ralph Parker wrote:
> I forgot to say that the RS-232 rate for K3, P3 and logging program are all
> set to 4800 baud.
>
> Ralph, VE7XF
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Tom Azlin N4ZPT-2]

I think the P3 to K3 needs to be 38400 bps as you can not change that
part. While the P3 to your computer can be any slower speed - I use
19,200 bps for computer to P3.

73, tom n4zpt

On 5/3/2012 4:43 PM, Ralph Parker wrote:
> I forgot to say that the RS-232 rate for K3, P3 and logging program are all
> set to 4800 baud.
>
> Ralph, VE7XF

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html