To:
[hidden email]
Subject: [Elecraft] P3 problem
I am having a problem with the P3. occasionally after a transmission and the
PTT or VOX is released, The P3 screen will remain frozen and look just as
it does during a transmission. This is not the problem related to the
firmware that was fixed in version .30.
=======original message above======
Sound like my problem exactly.
I have an email conversation going on with Gary from support.
So Elecraft is aware of my problem and now yours.
I suspect as more P3 get out in the field there might be more.
Gary - running the separate ground did not give me any results,
Still freezing.
It doesn't appear to happen when using the internal because the timing seems
different.
Is the internal keyer always in QSK. Sounds like it is.
de K2GN - Larry -
http://k2gn.comK3 S/N - 3278 P3 S/N - 51
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html