P3 question

[Trevor Smithers]

I see from the manual that the P3 uses a "specific command set" to communicate with the K3,
so presumably there will be no conflict with a Microham Digikeyer for instance that currently
occupies the K3 RS232 port and would now be connected to the P3 pass through port.

Trevor  G0KTN
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[KK7P]

> I see from the manual that the P3 uses a "specific command set" to communicate with the K3,
> so presumably there will be no conflict with a Microham Digikeyer for instance that currently
> occupies the K3 RS232 port and would now be connected to the P3 pass through port.

K3 <-> P3 communication is "firewalled" by the P3.  The K3+P3 appears to
the connected computer as a K3.

73,

Lyle KK7P
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html