P3 *remote* panadapter

[Elecraft mailing list]

Am I correct in thinking that the P3 is the only way to obtain a *remote*
panadapter with the K3S?  ie this cannot be done with some other sdr
combination as has been suggested for home operation?

 

David G3UNA

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Richard Ferch-2]

The P3 is not the only possibility. There are ways to use an SDR at the
radio site and relay the spectrum information to a display at the control
site. Some of these ways have the advantage of being integrated with the
radio control software (e.g. the N1MM+ spectrum display window).

73,
Rich VE3KI



G3UNA wrote:

Am I correct in thinking that the P3 is the only way to obtain a *remote*
panadapter with the K3S?  ie this cannot be done with some other sdr
combination as has been suggested for home operation?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]