P3 - unfinished product

classic Classic list List threaded Threaded
22 messages Options
12
Reply | Threaded
Open this post in threaded view
|

Re: P3 - unfinished product

Elecraft mailing list
>>>> I am continuously amazed by the amount of "stuff" people want to add to
Elecraft products, <<<<

AMEN!

Unlike everyone else, I don't need much.Just be sure to add the " Kitchen Sink "

(Tongue n Cheek )
((((73)))) Milverton / W9MMS.

      From: Kevin Stover <[hidden email]>
 To: [hidden email]
 Sent: Saturday, December 6, 2014 9:20 AM
 Subject: Re: [Elecraft] P3 - unfinished product
   
I am continuously amazed by the amount of "stuff" people want to add to
Elecraft products, in this case the P3, that are done BETTER and CHEAPER
by other things.

Want to monitor your output waveform...buy a used oscilloscope and spend
$10 for the parts to build a sampler. Better yet buy one of the
inexpensive  dual channel 100MHz Rigol O-scopes for less than $400 and
you've got an output monitor AND an O-scope.

How about we just add an solid state drive and Intel i3 processor with
appropriate motherboard with really good on board sound chip (oxymoron?)
running Windows 10 to the P3 and you could replace your shack
computer...kinda...sorta.... Of course the cost of all this convenience
will triple or quadruple the price of the P3... Of course Elecraft would
have to add a couple dozen personnel for the inevitable "help
desk"...but it will have a real good "gee whiz" factor.

--
R. Kevin Stover
AC0H
ARRL
FISTS #11993
SKCC #215
NAQCC #3441

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]


 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: P3 - unfinished product

KV5J
If the P3 is so great as is, I have an almost new one for sale on QRZ.  Without the NB for the SVGA board it not anywhere near good as other methods of using a panadapter.  So I went another direction.

Keith, XE3/K5ENS
12