I'd prefer it to be light, but anchored to the K3, I'd much rather
carry less weight when portable.
73 de M0XDF, K3 #174
--
They know enough who know how to learn. -Henry Adams (1838-1918)
On 22 Aug 2009, at 02:13, Dave-Boat Guy wrote:
> A quick comment for those that may think the P3 may slide around.
> If it is going to use the 2-dimensional fasteners, there is an easy
> way to add weight and structural rigidity at the same time.
>
> I replaced all the 2-D fasteners (where possible) with 1/2" copper
> bar stock on a K2. I drilled and tapped the appropriate holes and
> not only did it add weight, it added some rigidity as well. It
> doesn't fit everywhere due to interference, however, with a little
> machining (filing...it's soft) or going to a smaller size, it's and
> easy and inexpensive upgrade.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
