P3SVGA Resolution

[Elecraft mailing list]

I am contemplating adding the P3SVGA adapter to my P3.  One thing that
bothers me is that of the 4 supported resolutions, only one is commonly
available and not very often in smaller monitors that are convenient to
add to the already crowed station desk.  Most small monitors are
1366x768.  The next largest are 1600x900.  I wonder if there is any
possible way that Elecraft can upgrade the P3SVGA to add these much more
common resolutions.

73, Doug -- K0DXV
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Paul Saffren N6HZ]

Hi Doug,

Those resolutions do not have to match your monitor exactly.  For
example, you can run 1440x900 on a monitor that is capable of displaying
1920x1080 or greater.    Higher resolutions on the P3/SVGA will show
more detail (more pixels per span) but require slower update rates (more
FFT points).   For example I am using a monitor capable of much higher
resolution, but operate the P3/SVGA at 1280x1024 or 1440x900 as these
give plenty of detail with higher update rates.

-Paul

--
Paul Saffren - N6HZ
Project Manager
Elecraft Inc.
831-763-4211 x122
www.elecraft.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]