I have a kx3 --> kxpa100 -> kat500 hooked up. Both the kx3 and kxpa100 have internal tuners in bypass mode. With the kat500 in manual mode, I press the tune button on the kat500 to force a tune. When I press the XMIT button on the kx3, I often get an error on the kx3. It complains about an antenna or PA error. It doesn't do this if I place the KAT500 in bypass and use the kxpa100's tuner. So I'm wondering why I am getting these errors, as (even after getting the error) the tuner sees 1.2 or less SWR. It's more of a pain in the butt, because I have to do a few more button presses to clear the error and use the kx3.
Ideas ?
If you're wondering why I have it this way, it's because my KPA500 is going back to elecraft for transformer hum (or it would be between the kxpa100 and the KAT500).
-Kevin (KK4YEL)
-----
The problem with the world is that the intelligent people are full of doubts, while the stupid ones are full of confidence.
-----
The problem with the world is that the intelligent people are full of doubts, while the stupid ones are full of confidence.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
