PF-1 macro help needed

[Ralph Parker]

Is it possible to program a PF-1 macro to turn the audio equalizer ON/OFF?
My CW is OK, but my programming isn't :-)
Maybe I need a newer manual.

VE7XF

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Greg - AB7R]

Ralph,

Off the top of my head use the command to display the TX or RX EQ and
then use the switch command for the CLR button.  That should zero out
all the  EQ settings.  I don't think you can turn them on or
off......they're on all the time.  But zeroing out the setting would
have the same effect as turning it off.

Try MN008; SWT53; MN255;  this would be for the RX EQ.

Let me know how this works...I'm not in the shack right now.

Substitute MN008 with MN009 for the TXEQ.

73
Greg
AB7R


Ralph Parker wrote:

> Is it possible to program a PF-1 macro to turn the audio equalizer ON/OFF?
> My CW is OK, but my programming isn't :-)
> Maybe I need a newer manual.
>
> VE7XF
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>  

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html