PF1 and PF2 Programming Question

[Mike VE3YF]

Hi Mike (KI0HA):

Thanks for the info, actually I looked at the programming reference
and it is pretty straight forward. However 1 question comes to mind, in
my situation I have 2 different mics (Headset with HC-5 and the other
mic is a PR40) and they require the FP-L and FP-H and I see no
macro commands that set the Mic Gain Range.

I don't see anything right off, but is it possible to make the Macro
to incliude the settings of Mic Sel (Source, Mic Gain Range and Bias)

Any idea's, I guess worst case scenario, I could reconfig both both
TX EQ settings to work with both mics using either the High or Low Range.

Tnx.



73 De Mike
VE3YF

http://www.ve3yf.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[vk2rq]

Not only that, you can set up one PF key to toggle between two settings, so you leave the other PF key free to do something else.

Here is an example of a toggling setup (it’s for KX3, but the same principle can be applied to K3 too).

http://www.vk2rq.ampr.org/macros.html <http://www.vk2rq.ampr.org/macros.html>

73,
Matt VK2RQ
 

> On 5 Feb 2015, at 9:27 pm, Mike VE3YF <[hidden email]> wrote:
>
> Hi:
>
> I haven't tried my hand at doing some programming yet, but wondering if it is possible to set the PF1 and PF2 for TX EQ Audio settings.
>
> I would like to set PF1 for one set of TX EQ Settings (Working DX) and set PF2 for another set of TX EQ Settings (Ragchew). This way I
> can alternate between PF1 and PF2 for my desired settings instead of manually changing the TX Equalizer.
>
> Any help and or comments is greatly appreciated.
>
>
> 73 De Mike
> VE3YF
>
> http://www.ve3yf.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Mike VE3YF]

Thanks Matt:

I will try and do some experimenting this weekend. I have place your
site in my bookmarks, now need to fnd some spare time. Tnx,


73 De Mike
VE3YF

http://www.ve3yf.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]