PR6-10 ACC cable connection

[k5oai]

I already have an Elecraft cable between my K3's ACC plug and my KAT500.
I'm looking for recommendations how I can hook up my PR6-10 to that
cable. It's not like some cables that have ends that will unscrew. I am
reluctant to replace it as it has been rfi proof and has the tubular
toroids on each end already.
--
GB & 73
K5OAI
Sam Morgan
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Sam,

You need a "Y" cable.  Make certain it has all 15 wires connected
'straight through'.  A VGA Y cable will have several pins connected
together and will not work - it may even create 'strange happenings'.

If you ordered the KPAK3AUX Cable Set, you have the Y cable that was
part of that cable set.

73,
Don W3FPR

On 2/16/2014 4:36 PM, Sam Morgan wrote:
> I already have an Elecraft cable between my K3's ACC plug and my KAT500.
> I'm looking for recommendations how I can hook up my PR6-10 to that
> cable. It's not like some cables that have ends that will unscrew. I
> am reluctant to replace it as it has been rfi proof and has the
> tubular toroids on each end already.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html