PR6 use with 1 antenna

[EC7ANC Manolo]

Good evening elecrafters,

As I only have one antenna for 6 meters, I wonder how I could use the PR6 for TX and RX with that antenna?

Merry Christmast to the group.

Manolo EC7ANC



_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Greg - AB7R]

Manolo,

 

You simply connect the PR6 to the RX IN/OUT on the KXV3.  To use it just tap the RX ANT button.  On RX your signal path will go from ANT1 or ANT2 as selected to the RX OUT, through the PR6 and back in through the RX IN.  On TX of course it just goes out to the antenna you have selected. 

 

Make sure you set up the PR6 per the instructions.

 

73

Greg

AB7R

 

-----Original Message-----
From: [hidden email] [mailto:[hidden email]]On Behalf Of EC7ANC Manolo
Sent: Tuesday, December 23, 2008 2:40 PM
To: [hidden email]
Subject: [Elecraft] PR6 use with 1 antenna

Good evening elecrafters,

As I only have one antenna for 6 meters, I wonder how I could use the PR6 for TX and RX with that antenna?

Merry Christmast to the group.

Manolo EC7ANC

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com