PREamp 2

[Gary Gregory-2]

Just installed a new KSYN3A in a K3 Ser # 5387, display shows SYN 1 OK,
Preamp 1 works but Preamp2 is showing OFF.

Did I miss something?....when I move the VFO to change to ON, it displays
N/A

Must be late and not enough coffee?

Any advice would be appreciated.

Gary
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Nr4c]

The Pre amp2 is not on the Synth board. It's on the transverter update board (KXV3B I think).

Sent from my iPhone
...nr4c. bill

> On Apr 20, 2017, at 6:26 AM, Gary Gregory <[hidden email]> wrote:
>
> Just installed a new KSYN3A in a K3 Ser # 5387, display shows SYN 1 OK,
> Preamp 1 works but Preamp2 is showing OFF.
>
> Did I miss something?....when I move the VFO to change to ON, it displays
> N/A
>
> Must be late and not enough coffee?
>
> Any advice would be appreciated.
>
> Gary
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Gary Gregory-2]

Yes Bill, sux when memory let's you down mate.
I gave myself three uppercuts...lol
Thanks,
Gary

On Apr 20, 2017 9:53 PM, "Nr4c" <[hidden email]> wrote:

> The Pre amp2 is not on the Synth board. It's on the transverter update
> board (KXV3B I think).
>
> Sent from my iPhone
> ...nr4c. bill
>
>
> > On Apr 20, 2017, at 6:26 AM, Gary Gregory <[hidden email]> wrote:
> >
> > Just installed a new KSYN3A in a K3 Ser # 5387, display shows SYN 1 OK,
> > Preamp 1 works but Preamp2 is showing OFF.
> >
> > Did I miss something?....when I move the VFO to change to ON, it displays
> > N/A
> >
> > Must be late and not enough coffee?
> >
> > Any advice would be appreciated.
> >
> > Gary
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:[hidden email]
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to [hidden email]
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]