PS for KX3

[KXBill]

Who was looking for a small PS for his KX3?  Here is one from MPJ.  16 VDC at 3+ amps.  You'll need a power cord and an adapter plug to fit the K's.  Hard to beat the price.

http://www.mpja.com/12-27-12.asp?r=358010&s=12

Later

de Bill-w7kxb . .    
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Bill,

Sorry, but 16 volts is too high for the KX3.  The maximum voltage must
be 15 volts or below.  The KX3 has internal excess voltage sensing and
my shut down with a greater than 15 volt supply to protect itself.

Jeesh, how many do not read the specifications or choose to ignore them
- the specs contain a wealth of information about the limits of things
like voltage input.

73,
Don W3FPR

On 12/26/2012 4:39 PM, Bill Harris wrote:
> Who was looking for a small PS for his KX3?  Here is one from MPJ.  16 VDC at 3+ amps.  You'll need a power cord and an adapter plug to fit the K's.  Hard to beat the price.
>
> http://www.mpja.com/12-27-12.asp?r=358010&s=12
>
> Later
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html