PX3 Firmware BETA Version 1.15 available

[Paul Saffren N6HZ]

PX3 BETA Version 1.15 is now available for download via the Elecraft Website:
ftp://ftp.elecraft.com/PX3/firmware/beta/px3m0115.zip

Please read PX3 Beta Firmware Instructions for installing beta firmware, found here:
http://www.elecraft.com/PX3/PX3_software.htm

Only the current production firmware releases can be downloaded by PX3 Utility automatically.


Version release notes:

MCU 1.15 / 10/31/2014

* Adds transverter support; two new menu entries XV Gain and XV Invert allow the user to change the gain and tuning inversion based on the transverter band.
* Adds 2 more pixels between the top of the decoded text and the frame of spectrum/waterfall area.
* Separate text sub-menu added.
* Text Enb turns on/off text decode display so it can be used with a function key.
* AutoTxt menu allows text decode display to follow the KX3 mode. When enabled going to CW, or data modes automatically turns on text decode in PX3, then switches off when exiting back to USB/LSB/AM/FM etc.
* Text window displays “Text Display” when first text window is first initialized, clears when Rx text is displayed, or after 4 second delay.
* Marker A/B moves faster with fast turn of Select knob.

This revision requires KX3 firmware revision 2.25 or higher.

73,

Paul n6hz
Project Mgr
Elecraft Inc.

[JE0LFI]

> * AutoTxt menu allows text decode display to follow the KX3 mode. When enabled
> going to CW, or data modes automatically turns on text decode in PX3, then switches
> off when exiting back to USB/LSB/AM/FM etc.

AutoTxt mode works well.

But... Setting is not saved. Turn off the PX3, AutoTxt becomes off.

73,

JE0LFI / Nakamura

[John_N1JM]

Same here.

John N1JM