Remove the screws and clean the plexi. Nothing untoward will happen.
-----Original Message-----
From:
[hidden email] <
[hidden email]> On
Behalf Of Scott Manthe
Sent: Sunday, March 31, 2019 7:29 PM
To:
[hidden email]
Subject: [Elecraft] PX3 LCD cover cleaning
I've got dust under the plexiglass LCD cover on my PX3. Since the 4 screws
hold the circuit board to the front of the PX3, I'm wondering if taking
those off to remove the PX3 plexiglass will cause the board to fall off the
back of the front into the box? I can't remember if the side jacks will hold
the board in place or not. I know it's a trivial process to open it up, but
I'd prefer not to just to wipe some dust off the back of the plexiglass.
I've built a KX3, a KPA500 and most of a K3 and am worried about the PX3
main board falling off the front of the enclosure...
73,
Scott N9AA
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
