PX3 Production Firmware Release 1.16

[Paul Saffren N6HZ]

PX3 revision 1.16 is now a production release and may now be downloaded  directly using the PX3 Utility.  This release includes minor improvements along with several bug fixes.  Be sure to upgrade your KX3 to the latest revision 2.25 or above.
 

Release notes:

MCU 1.16 / 11/10/2014

* Adds transverter support; two new menu entries XV Gain and XV Invert allow the user to change the gain and tuning inversion based on the transverter band.
* Adds 2 more pixels between the top of the decoded text and the frame of spectrum/waterfall area.
* Separate text sub-menu added.
* Text Enb turns on/off text decode display so it can be used with a function key.
* AutoTxt menu allows text decode display to follow enables text decode on/off based on KX3 mode. When enabled going to CW, or data modes automatically turns on text decode in PX3, then switches off when exiting back to USB/LSB/AM/FM etc.
* Text window displays “Text Display” when first text window is first initialized, clears when Rx text is displayed, or after 4 second delay.

Links and instructions can be found at:

PX3 Firmware

KX3 Firmware





73,

Paul

--
Paul Saffren - N6HZ
Project Manager
Elecraft Inc.
www.elecraft.com

[JE0LFI]

>MCU 1.16 / 11/10/2014
>
>* AutoTxt menu allows text decode display to follow enables text decode on/off based on KX3 mode. When >enabled going to CW, or data modes automatically turns on text decode in PX3, then switches off when exiting >back to USB/LSB/AM/FM etc.

AutoTxt mode works well.

But... Setting is not saved. Turn off the PX3, AutoTxt becomes off.

73,

JE0LFI / Nakamura

[Paul Saffren N6HZ]

Hi Nakamura,

This is definitely a bug and will be fixed in the next release.  

73,

Paul