I just received the PX3 kit. It was rather straight forward to assemble and
to set up. I am learning how to operate the PX3. I have two questions.
1. Configuring the power switch, page 22. Pins 2 & 3: "The PX3
turns on automatically when power is applied and may be turned off and off
using the PWR switch as long as power is applied". I find that the PX3 does
not automatically turn on when power is applied. I need to manually turn on
the PX3 by pressing the PWR switch after power is supplied. Does anyone
have a solution to this problem?
2. PX3 Utility. The capture screen function does not work. When I
press the capture image button in the utility program, the PX3 freezes and
the KX3A100 turns off. I have remove power from the PX3 and I have to reset
the PA Mode in the KX3 menu back to on. Does anyone have any thoughts on
this issue?
Thank you.
John Lally
W7JJL
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
