I really like the PX3, but one word of caution. Read carefully in the manual where it says to plug in the cables FULLY! Especially to I/Q cable. If you don't, you will get no "Opposite Band Nulling". Tried to do the procedure and no reaction to either control. Pressed again on the I/Q plug and all was well. I did run a quick check on all bands and the PX3 is doing just fine.
Worked a few W1AW/4 and 7 sta last night. This is like using the K3. Fun being back on 100 watts again after almost a year with the KPA500. Being able to see both ends of a pile up is just cool.
I no longer have need to get NAP3 working on my laptop. I'm not a mouser, I like to twist and turn. Just more comfortable to me.
Sent from my iPhone
...nr4c. bill
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
