PX3 and CW

[Jan-10]

It's fun using the CW with the KX3 and the PX3  via the KX3 Utility
but since the recent PX3 firmware upgrade  there appears to be
an /*upper limit*/ to "good decoding"  ~ like at above 30 wpm  ~
Has anyone else noticed this?   I don't recall this being an issue
before I updated the firmware.  It is present with a direct keyboard
to the PX3 also . . .  {I use an older Dell L100 keyboard for that}
Cheers, Jan K1ND
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Paul Saffren N6HZ]

Hi Jan,

Make sure that you do not have the PX3 Utility active while you are trying to use the PX3 keyboard, or vice verse.  The KX3's CW decode can only be 'fed' to one place.  You will certainly see dropped characters if the utility is active while using the keyboard.

73,

Paul