Panadapter Kit

[Jack Smith-6]

First, thanks to Mike W1BNC for the kind words about the Z90 and Z91
panadapter project
I've been working on since the first of the year.

Because almost all my prospective customers are Elecrafters, I've
ordered a K2 for my own use
and for testing. Unfortunately, I don't have time to enjoy the building
process myself and
Frank, W6NEK, is building it for me. I look forward to receiving it in
the next two or three weeks.

I've added a fair bit of new information to my web site in the last few
days that
I hope will be of general interest on panadapters, scan speeds, etc. I
know this
is material that I have not seen frequently posted in the general
amateur literature.
http://www.cliftonlaboratories.com/Updates.htm is a good starting point
to see the changes.

The ptototype  K2 adapter board will be tested in a real K2 this week
and I have plans for some changes to it as soon as I have my hands on my
own K2.

I don't know the protocol on this reflector, so I hope this is not
considered to be too much of a commercial for the Z90/91 pandapter kit.

Also, I sent this message once before, but from the wrong account (I
think) so apologies if it shows up twice.

73 de Jack K8ZOA
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[wb2ssb]

Speaking as a dyed-in-wool elecrafter (I have purchased and built
virtually every product they offer!) ... I welcome the posting of
relevant, third-party add-ons that complement the wonderful electraft
product line.  The Z90/Z91 promises to be terrific addition to my shack
...


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Jack Smith
Sent: Sunday, August 06, 2006 3:01 PM
To: [hidden email]
Subject: [Elecraft] Panadapter Kit


First, thanks to Mike W1BNC for the kind words about the Z90 and Z91
panadapter project
I've been working on since the first of the year.

Because almost all my prospective customers are Elecrafters, I've
ordered a K2 for my own use
and for testing. Unfortunately, I don't have time to enjoy the building
process myself and
Frank, W6NEK, is building it for me. I look forward to receiving it in
the next two or three weeks.

I've added a fair bit of new information to my web site in the last few
days that
I hope will be of general interest on panadapters, scan speeds, etc. I
know this
is material that I have not seen frequently posted in the general
amateur literature.
http://www.cliftonlaboratories.com/Updates.htm is a good starting point
to see the changes.

The ptototype  K2 adapter board will be tested in a real K2 this week
and I have plans for some changes to it as soon as I have my hands on my

own K2.

I don't know the protocol on this reflector, so I hope this is not
considered to be too much of a commercial for the Z90/91 pandapter kit.

Also, I sent this message once before, but from the wrong account (I
think) so apologies if it shows up twice.

73 de Jack K8ZOA



------------------------------------------------------------------------------
This email message, including any attachments, is for the sole use of the intended recipient(s) and may contain information that is proprietary, confidential, and exempt from disclosure under applicable law. Any unauthorized review, use, disclosure, or distribution is prohibited. If you have received this email in error please notify the sender by return email and delete the original message. Please note, the recipient should check this email and any attachments for the presence of viruses. The organization accepts no liability for any damage caused by any virus transmitted by this email.
==============================================================================

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com