Panadapter Setup for K2 - Where can I read-up on this? Goos source for advice?

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

Panadapter Setup for K2 - Where can I read-up on this? Goos source for advice?

Dean44
I am looking for a source for good advice to set up a panadaper, software etc for the K2. Best to get/build, how to set it up etc.

Thanks in advance for your help!

Dean
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: Panadapter Setup for K2 - Where can I read-up on this? Goos source for advice?

Don Wilhelm-4
Dean,

The plan for the P3 as I have heard it is to also support the K2 IF, and
I cannot recall if the LP-PAN is available with an IF input to match the
K2 IF.  You would need a buffer amplifier added to your K2 to bring the
IF signal out.  There is a version of Jack Smith's Z10000 buffer
amplifier kit just for that purpose.  Check
http://www.cliftonlaboratories.com/z10000_buffer_amp.htm for more
information.
You will also find on that same page that you can use a Softrock
receiver to produce the panoramic display on a computer display rather
than a P3 or LP-PAN if that less expensive alternative appeals to you.  
(I don't know how many SoftRock 6.2 boards Tony Parks has available, but
you can ask).

73,
Don W3FPR

Dean wrote:

> I am looking for a source for good advice to set up a panadaper, software etc for the K2. Best to get/build, how to set it up etc.
>
> Thanks in advance for your help!
>
> Dean
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.725 / Virus Database: 270.14.134/2613 - Release Date: 01/11/10 02:35:00
>
>  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: Panadapter Setup for K2 - Where can I read-up on this? Goos source for advice?

Matt Palmer-4
check here for softrocks.

http://www.kb9yig.com/

they are still in high demand so you may have to check daily to see
when more are added.

Matt
W8ESE



On Tue, Jan 12, 2010 at 9:12 AM, Don Wilhelm <[hidden email]> wrote:

> Dean,
>
> The plan for the P3 as I have heard it is to also support the K2 IF, and
> I cannot recall if the LP-PAN is available with an IF input to match the
> K2 IF.  You would need a buffer amplifier added to your K2 to bring the
> IF signal out.  There is a version of Jack Smith's Z10000 buffer
> amplifier kit just for that purpose.  Check
> http://www.cliftonlaboratories.com/z10000_buffer_amp.htm for more
> information.
> You will also find on that same page that you can use a Softrock
> receiver to produce the panoramic display on a computer display rather
> than a P3 or LP-PAN if that less expensive alternative appeals to you.
> (I don't know how many SoftRock 6.2 boards Tony Parks has available, but
> you can ask).
>
> 73,
> Don W3FPR
>
> Dean wrote:
>> I am looking for a source for good advice to set up a panadaper, software etc for the K2. Best to get/build, how to set it up etc.
>>
>> Thanks in advance for your help!
>>
>> Dean
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> ------------------------------------------------------------------------
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com
>> Version: 9.0.725 / Virus Database: 270.14.134/2613 - Release Date: 01/11/10 02:35:00
>>
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: Panadapter Setup for K2 - Where can I read-up on this? Goos source for advice?

ac0h
In reply to this post by Don Wilhelm-4

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: Panadapter Setup for K2 - Where can I read-up on this? Goos source for advice?

Alan Bloom
http://www.cliftonlaboratories.com/k2_interface.htm


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html